Skip to main content

Development of a wearable global positioning system for place and health research

Abstract

Background

An increasing number of studies suggest that characteristics of context, or the attributes of the places within which we live, work and socialize, are associated with variations in health-related behaviours and outcomes. The challenge for health research is to ensure that these places are accurately represented spatially, and to identify those aspects of context that are related to variations in health and amenable to modification. This study focuses on the design of a wearable global positioning system (GPS) data logger for the purpose of objectively measuring the temporal and spatial features of human activities. Person-specific GPS data provides a useful source of information to operationalize the concept of place.

Results

We designed and tested a lightweight, wearable GPS receiver, capable of logging location information for up to 70 hours continuously before recharging. The device is accurate to within 7 m in typical urban environments and performs well across a range of static and dynamic conditions.

Discussion

Rather than rely on static areal units as proxies for places, wearable GPS devices can be used to derive a more complete picture of the different places that influence an individual's wellbeing. The measures are objective and are less subject to biases associated with recall of location or misclassification of contextual attributes. This is important for two reasons. First, it brings a dynamic perspective to place and health research. The influence of place on health is dynamic in that certain places are more or less relevant to wellbeing as determined by the length of time in any location and by the frequency of activity in the location. Second, GPS data can be used to assess whether the characteristics of places at specific times are useful to explaining variations in health and wellbeing.

Background

The notion of place in health research is both a spatial unit of analysis and a context that comprises the physical resources, exposures and social relations that may support or weaken health status. As a spatial unit, place is a space with boundaries commonly used for categorizing and discretizing predictors of health status. As context, places can be defined by the significance and meanings people attach to locations where health promoting or health suppressing activities occur. The idea of place as a determinant of health status has recently become a crucial focus of national population health initiatives [1, 2]. An increasing number of empirical studies in medical geography and epidemiology have determined that characteristics of place are associated with variations in health-related behaviours and outcomes, even after individual-level attributes and behaviours are taken into account [3–5]. Although statistical associations between characteristics of place and health can be demonstrated, the underlying mechanisms responsible for these relationships remain more elusive. The significant challenges for place-based health research are to ensure that places are accurately represented spatially, and to identify those aspects of context that are related to variations in health and amenable to modification. This study focuses on the more practical issue of spatial bounding as a necessity to operationalize the concept of place. We introduce the development and testing of a wearable global positioning system (GPS) data logger for the purpose of objectively measuring the spatial extent of an individual's location over time. Examination of time-location data allows for inference on the types of activities associated with health status.

There are three principal methods of spatial bounding that dominate the previous literature on place and health research. Most studies make use of existing administrative boundaries, usually created a priori by national statistical or postal services. For example, analyses from the United States and Canada usually employ census tracts – small and relatively stable statistical divisions that vary in size by the density of settlement in urban areas [6, 7]. Another approach defines places qualitatively according to boundaries and community assets as perceived and defined by their inhabitants [8–10]. More recent studies are defining place according to results derived from manual or automated zoning procedures [11, 12]. Place boundaries can be manually determined by statistical design rules to assemble small geographical building blocks into larger regions so as to control population size, or another denominator of interest. Alternatively, basic spatial units can be grouped into larger ones automatically using automated zoning software.

Existing methods of spatial bounding are subject to several limitations. First, the majority of studies assume that the relationships between context and health operate within the confines of a single spatial unit, usually represented by an individual's residential census tract. This assumption may lead to the misclassification of context to variations in health status since it is unlikely that a person would spend all of their time in their residential census tract. Places that influence health are more likely to be spatially interdependent, linked by functional, cognitive and, possibly, sentimental relationships between what happens at one point in space and what happens elsewhere [13]. People live and function in various places that interconnect in complex ways, and to represent place as a single spatial area risks losing important exposure information. Second, researchers must ascertain the spatial scale appropriate for analysis, the level of aggregation characteristic to the data available, as well as the appropriate temporal frame within which to study causal relationships. Publicly-available datasets are usually static in space and time, and data is routinely collected without consideration of spatial or dynamic process [14]. Moreover data for health research are limited by lack of attention to spatiality, specifically how the spatial-temporal structuring of daily life defines how social action and relationships are represented [15]. Third, the scale of observation can influence inference [16, 17]. This effect is called the "modifiable aerial unit problem" and, because changing the shape or size of the units on which data are mapped will change average values of the variables recorded, this can change the resulting correlations or statistical models generated from the data [18]. Spatial units such as postal codes or census tracts may also be changed over time, so altering statistical estimates [6, 13, 19–22]. Several solutions to the problem have been proposed, including statistical bounding [23], multi-scale and zone sensitivity analyses [24], and spatially-weighted regression techniques [25, 26].

An alternative approach to delineating spatial boundaries makes use of time-location data. Recording changes in spatial location through time ultimately provides the most complete source of evidence on how place may influence health. All human activities have spatial and temporal dimensions: activities occur at particular places for limited durations [27, 28]. By capturing simultaneously the locations and activities individuals through time it is possible to construct a series of space-time paths that represent objectively both spatial extent and the intensity of activity (as represented by time) in one or more places. Information about time, location and activity is usually acquired from interviews, personal observation (shadowing) or through time-diaries [29]. Other approaches using electronic sensors and loggers have been employed quite successfully in the context of transportation research and time-activity studies [30–33]. Recent efforts have improved on GPS tracking technologies for the purpose of measuring harmful exposures in human health research [34, 35]. However, many of these studies have faced limitations in GPS accuracy, battery capacity and data logging memory thus preventing the collection of time-location data over extended periods of time (> 1 week) under a variety of environmental conditions. These limitations also make it difficult to capture individual time-location information in a variety of contexts. The present article describes the development of a new time-location measurement tool suitable for studies where information about location and time is used in predicting variation in human health outcomes.

Global Positioning Systems

In 1995 the US Department of Defence (DOD) developed a satellite-based radio navigation system capable of determining within centimetres a position on the earth's surface. The system consists of 24 active and several "back-up" satellites, that orbit the earth providing all-weather navigation and surveying worldwide [36]. A summary of GPS capabilities is provided here, but for detailed information readers are referred to Global Positioning System: Theory and Practice by Hoffman-Wellenhof et al [37].

Global positioning systems (GPS) consist of three components: satellites in space, a ground control system, and the user's instrument. The space component consists of orbiting GPS satellites equipped with atomic clocks, and transmitting two radio frequencies modulated with two types of code: precise and standard. The precise code is reserved for U.S. military operations while the standard code can be used freely by any civilian in possession of a GPS receiver. The civilian code comprises a 50 bs-1 radio signal transmitted at 1,575.42 MHz carrying three signals: a pseudo-random code, ephemeris data, and almanac data. Together these provide information on the satellites available for fixing a position, the current time and date, and the approximate constellation of the satellites at any time throughout the day. The ground control segment consists of five monitoring stations, three ground antennas, and a master control station. The monitoring stations passively track all satellites in view and accumulate ranging information. This information is processed at the master control station to determine satellite orbit geometry and to update the navigation message broadcast by each satellite. The user segment of the system consists of GPS receivers that calculate their own distance from each satellite based on the travel time of the pseudo-random sequences encoded into the radio signal. Given the geometric positions of the satellites (their ephemeris), four pseudo-ranges are sufficient to correct clock error and to compute the three dimensional position of the receiver with an average accuracy of approximately 10 m [38, 39]. Most modern GPS receivers can track 12 or more satellites simultaneously, improving positional accuracy to within 5 m or less.

Natural Resources Canada, a federal government agency, manages a network of ground stations that transmit differential GPS (DGPS) corrections. These ground stations receive satellite information at a known ground location and estimate the difference between the information received by the satellite receiver and the actual location. Differential-enabled GPS receivers can receive the broadcast DGPS signals from the ground stations and make correction calculations, improving accuracy of position to within 3 m or less. Correction data are also available as public domain information from the Canada-wide differential GPS service, the International GPS Service and the Canadian Coast Guard. GPS signal correction can be performed at the time of measurement, using a DGPS receiver, or data may be post-processed if information on both the position of the DGPS receiver and ground station are collected. Improvements in location accuracy can also be achieved through the reception of signals from wide area augmentation systems (WAAS) and researchers should check to see if this service is available in their geographic region.

GPS signals are not immune to interference. The most severe form can occur from intentional signal degradation, also called "selective availability" by the United States National Space-Based Positioning, Navigation and Timing (PNT) Executive Committee [37]. Intentional, slowly changing random errors could be introduced into the pseudorandom code transmitted by each satellite resulting in substantial reductions in positional accuracy of 50 m or more in both the horizontal and vertical directions [40]. However, selective availability was removed from the system under executive order on May 1, 2000. The United States Department of Defence has since declared selective availability will no longer be used based on security concerns.

Several additional sources of interference may introduce errors that limit the usefulness of GPS in some spheres of human health and activity research. Variability in atmospheric conditions may affect the velocity of GPS signals. In the troposphere water vapour can slow radiofrequency signals resulting in overestimation of signal range. In the ionosphere different components of a signal can be advanced or delayed when interacting with charged gases. The sum of these atmospheric effects can result in errors of 30 to 60 m and vary depending on the angle of inclination of the satellites in view [41]. These effects are greater for satellite signals nearer the horizon where signals travel further through the atmosphere before reaching the GPS receiver. Of particular interest to human tracking studies are multi-path errors arising from the reflection of satellite signals from other surfaces, including buildings, vegetation, the ground or water. GPS signals are also blocked by materials such as concrete and steel thus eliminating reception within many institutional and commercial buildings. GPS reception is nonetheless relatively good in automobiles and public transportation vehicles such as buses and trains. GPS accuracy may also be compromised by poor satellite geometry, viewed from the user's location; precision is greatest when signals are received from satellites that are widely dispersed in azimuth and elevation. Thus, two satellites in the same location relative to the antenna provide similar information. The influence of satellite geometry can be quantified using dilution of precision (DOP) indices. Two DOP measures that are important for human tracking research include the positional and horizontal dilution of position (PDOP and HDOP). The first measure expresses uncertainty in overall position whereas the latter assesses uncertainty on the x and y axes. DOP measures generally range from 1 to 10 so that a location estimated with an HDOP of 2.6 has an uncertainty in the horizontal position that is approximately 2.6 times that of the receiver capability.

Researchers and GPS users interested in minimizing positional errors can undertake a mission planning exercise. GPS satellite orbits are known and predictable so that the number of available satellites and their geometric position can be computed for any location and any time. Mission planning software is freely available and almanac information can be downloaded electronically in multiple formats. Figure 1 is a typical report from mission planning software showing the number of satellites (visibility) and two DOP values (PDOP and HDOP)for 0700 to 2100 hours on September 25, 2007, at an urban location in Halifax, Nova Scotia. The opportunity for best reception is between 0900 and 1630 hours when seven or more satellites are available at most times within this window and PDOP values are less than 2.3.

Figure 1
figure 1

The number of satellites and dilution of position measurements (PDOP and HDOP) for September 25, 2007, at a central location in urban Halifax, Nova Scotia. DOP values of less than 2 are more desirable.

GPS Applications in Health Research

Advances in the miniaturization of GPS and related technologies have led to an assortment of applications: timing, surveying, logistics, traffic management and control, security, marketing, and navigation systems [42]. Of particular interest here is the development of GPS technology for health-related applications, specifically those concerned with navigation and tracking. Administrators of emergency 911 systems in many larger urban areas use geocoded address and GPS navigation systems to direct emergency response activities. The incorporation of assisted-GPS technology into cellular telephones allows emergency response teams to accurately assess the location of the distressed caller. The U.S. Federal Communications Commission (FCC) currently requires mobile phone service providers to locate emergency (E911) callers with an accuracy requirement of 100 m (67%) or 300 m (95%) for network-based solutions and 50 m (67%) or 150 m (95%) for handset-based solutions (usually GPS-enabled) [43]. Geocoded emergency 911 databases can be used to identify the location of an individual at a specific time; this information can be linked to contextual data to explore the role of place as a determinant of health emergencies. GPS in conjunction with other technologies has been used to support tuberculosis control programs in South Africa [44, 45], and to identify high-risk areas for transmission of vector-borne and environmental diseases [46]. GPS is also used to investigate the positional accuracy of geocoding processing in epidemiological research [47, 48]. Finally, microscale positioning systems that use three-dimensional imagery instead of satellite data are showing promise in surgical applications [49].

Although in its infancy, the use of GPS technology for human tracking presents an enormous opportunity for improving understanding of how the characteristics of places and environmental context influence human activity as well as health and well-being. Many technologies and techniques for human tracking have evolved from wildlife tracking research. GPS receivers have been used to track turtles [50], bears and other large mammals [51], farm and pastoral animals [52, 53], and primates [54, 55] with some success under a variety of landscape conditions. Very light GPS-enabled air pollution sensors have been fastened to homing pigeons in order to send real-time location-based pollutant information to an online database and mapping server (see http://Pigeonblog.mapyourcity.net).

Innovations in GPS technology have cultivated interest in the development of portable and wearable GPS tracking devices for research on human activity. The majority of development in this area has been devoted to the commercialization of technologies for tracking criminals or persons under care of the courts. Titanium ankle bracelets with embedded GPS are routinely used for real-time tracking of prisoner transfers and for monitoring convicted offenders who are subject to restrictions on movement [56]. Several hardware vendors are retailing similar devices to monitor individuals with memory impediments (including Alzheimer's disease), children or individuals at risk of kidnapping, and family pets. Users can establish a "geofence" that generates an alert when a device moves beyond the limits of a predefined geographic boundary.

GPS technology has also been used in studies of physical activity and human exposures. Studies of exercise physiology and nutrition have used lightweight GPS receivers to assess physical activity as measured by the velocity of walking and running [38], to determine the mechanical power of walking [39, 57], and to geographically contextualize accelerometry data, which indicates the locations where physical activity occurs [58]. Time diaries play an important role in epidemiological assessment of exposures to hazardous agents present in the environment. Several studies have employed commercially-available or custom designed wearable GPS data loggers to validate time-activity diaries [34, 35] or to track individuals in studies of pesticide exposure [59]. More recently, GPS-enabled cell phones have been used to track adolescent travel patterns and activity information [60]. GPS technologies are now being linked with a variety of sensors to investigate relationships between environmental conditions and human physiology in time and space; these include sensors of environmental factors such as carbon monoxide concentrations or air temperature, and health-related factors such as heart rate [61, 62].

The purpose of this study is to develop and pilot test a customized wearable GPS data logger suitable for tracking human subjects over lengthy periods of time. The ability to track people over extended periods of time facilitates the development of individualized spatial units for place and health analyses. In more urbanized areas the application of GPS technology to accurately measure location over time requires evaluative pilot testing for reliability and validity to ensure feasibility of the technology under actual conditions. Here we propose a general framework of dynamic and static tests for evaluating and testing human tracking devices based on GPS technology. A novel contribution of this work is the testing of a wearable GPS across multiple modalities of dynamic measurement among a variety of urban contexts. Knowledge of time-location patterns plays a critical role in understanding how people interact with, and use, space, and reveals the 'places' relevant to the study of variations in health outcomes.

Methods

Development of a Wearable GPS Data Logger

Technological features relevant to the development of wearable GPS for exposure assessment research have been discussed elsewhere [35, 59]. The following list incorporates features from previous work, and introduces several additional physical and performance-based features judged to be critical for human tracking studies: a) size and weight (relatively light and unobtrusive, <0.5 kg), b) logging capability (configurable logging frequency and adequate data storage), c) run-time (minimum 2 d battery capacity at frequent sampling intervals, quick recharge), d) passive (simple to operate and requiring little or no interaction during logging), e) durable (resistant to vibration, minor impacts and water resistant), f) fast time-to-first-fix (obtain fix quickly after signal loss), g) accurate (2–5 m resolution and precise among a variety of built and natural environments).

After constructing several prototypes we developed a wearable GPS data logger instrument called the HeraLogger. The HeraLogger comprises a PVC case (165 mm × 71 mm × 25 mm) containing the GPS module, data logger and battery pack, and an external magnetic patch antenna (Figure 2). The instrument weighs approximately 170 g and easily fits into a jacket pocket or small bag. The antenna has a 2 m cable and can be positioned appropriately to maximize visibility of the sky and satellite signal reception. The GPS module can be configured to output position information at sampling rates up to a maximum of four times per second; data are logged to a removable SD card with capacity up to 1 GB. The instrument can accommodate multiple battery capacities, ranging from 2.4 Ah to 10.4 Ah; this range corresponds to 16 h to 71 h of runtime, or 57 600 to 248 400 data points using a one per second sampling rate. An on/off switch initiates the logging of geographic position and the instrument can be left on while recharging the batteries. The GPS module is a 16-channel receiver with a rated time-to-first-fix of less than 34 s for a cold start, less than 3.5 s for a hot start, and is accurate to within 2 to 5 m of its actual position [63]. Software was developed to read, parse and write satellite data to a text file suitable for import into a geographic information system or statistical software package. The cost of each instrument is approximately $450 not including labour costs associated with assembly. Four GPS instruments were assembled for further testing.

Figure 2
figure 2

The HeraLogger, a wearable GPS data logger for health and place research.

Static Tests

Static testing of the Heraloggers was conducted during the summer of 2007 at Dalhousie University, Point Pleasant Park and at the Art Gallery of Nova Scotia in Halifax, Nova Scotia. Three static tests were performed to assess instrument accuracy and precision under field conditions commonly experienced by human subjects. These conditions included the edge of an urban forested park (some obstruction from trees), an open rooftop with no obstructions, and near a building wall to simulate urban canyon conditions (Figure 3). GPS performance improves as the percentage of open sky increases [36].

Figure 3
figure 3

Configuration of GPS instruments for static testing: a) positioned adjacent to a survey monument; b) various rooftop locations at least 1 m apart; c) perpendicular to building wall at 1 m increments.

Precision was estimated for all three sites; accuracy was assessed only at the park location using a known geodetic location, in this case a municipal survey monument maintained by the Province of Nova Scotia (Northing: 4940643.46, Easting: 454981.21, NAD83, UTM Zone 20 N). The four instruments were assessed simultaneously to control for the effects of weather (atmospheric interference) and variations in position estimation resulting from dilution of position (DOP). DOP refers to the geometric strength of satellite configuration on GPS accuracy [37]. None of the logged synchronous data were filtered for GPS signal quality so as to simulate actual field conditions. Sampling periods were not selected for optimal signal reception.

Urban Park Static Testing

The antenna from each GPS instrument was placed as close to the geodetic point as possible. The potential for inter-instrument interference was negligible given the use of passive antennas on each GPS device. Data were collected at 5 s intervals for a 1 h period resulting in a total of 720 data points per instrument for analysis. The average of all logged coordinates was compared with the known geodetic point to obtain an estimate of the accuracy of each instrument and to evaluate the total mean error from all four instruments. An additional test was performed to evaluate instrument precision. Data were collected at 5 s intervals for a 2 h period in a location in close proximity to the geodetic reference position. Precision was measured in terms of the standard deviation of the measured coordinates for each instrument.

Rooftop Static Testing

To evaluate the static performance of the GPS instruments under open sky conditions, four instruments were placed in watertight containers and positioned in a random formation (with a minimum distance between instruments of 1 m) on the rooftop of a building (Northing: 4943129.5, Easting: 453208.7, NAD83, UTM Zone 20 N) at Dalhousie University. An effort was made to select a rooftop of sufficient elevation to prevent interference of satellite signals (multipath errors) from adjacent structures. GPS data were collected over a 24 h period.

Building Wall Static Testing

To assess the impact of multipath errors arising from the influence of tall buildings characteristic of dense urban development (also known as the urban canyon effect), GPS instruments were placed at 1 m intervals in a straight line perpendicular to the outside wall of an eight story building (Northing: 4944229.0, Easting: 454802.6, NAD83, UTM Zone 20 N) in downtown Halifax. We hypothesize signal reception should worsen under 'urban canyon' conditions where the potential for multipath errors due to building interference increases. Data were again collected at 5 s intervals for a 1 h period.

Static Testing Analysis

Accuracy and precision based on the static tests were evaluated according to guidelines established by the Institute of Navigation and U.S. Department of Defence GPS specification documents [64, 65]. Since the tracking of human movement focuses on the location of an individual at a point in time, only the horizontal accuracy and precision of the GPS instruments were calculated. All logged coordinates were converted from WGS-1984 geographic coordinates to UTM Cartesian coordinates (UTM, NAD83, Zone 20 N). The current version of WGS-1984 and the North American Datum of 1983 are equivalent; however, we note that the native instrumentation of the GPS system determines coordinates within the WGS-1984 reference system and thus, and transformations should be done in post-processing. The difference in horizontal accuracy and precision was calculated using equation 1:

Δ H = ( Δ e 2 + Δ n 2 ) 1 2 , MathType@MTEF@5@5@+=feaagaart1ev2aaatCvAUfKttLearuWrP9MDH5MBPbIqV92AaeXatLxBI9gBaebbnrfifHhDYfgasaacPC6xNi=xI8qiVKYPFjYdHaVhbbf9v8qqaqFr0xc9vqFj0dXdbba91qpepeI8k8fiI+fsY=rqGqVepae9pg0db9vqaiVgFr0xfr=xfr=xc9adbaqaaeGaciGaaiaabeqaaeqabiWaaaGcbaGaeuiLdqKaemisaGKaeyypa0ZaaeWaaeaacqqHuoarcqWGLbqzdaahaaWcbeqaaiabikdaYaaakiabgUcaRiabfs5aejabd6gaUnaaCaaaleqabaGaeGOmaidaaaGccaGLOaGaayzkaaWaaWbaaSqabKqbagaadaWcaaqaaiabigdaXaqaaiabikdaYaaaaaGccqGGSaalaaa@3D80@
(1)

where Δe is the change in longitude [easting], and Δn is the change in latitude [northing]. In both directions the change is dependent on a reference location. GPS instrument accuracy measures were derived from the forested park static test with the average of each instrument's logged coordinates compared to a known geodetic point. Precision measures were calculated using average of all logged points for each GPS instrument as the reference location so that coordinate point was compared to the mean of all logged coordinates. We assumed a Gaussian error distribution for measurements of latitude and longitude, which has been shown to be reasonably representative of coordinate measurements based on stand-alone GPS receivers [66]. The calculated difference values [ΔH ] for each GPS instrument were ranked in order to apply the most common methods of comparing GPS accuracy, based on the circular error probable [CEP], horizontal accuracy distributions, and standard deviations in the x and y directions for each instrument [67, 68]. CEP is the radius of a circle, centred at the antenna position, containing 50 percent of the points around the average value of all measurements [69]. Horizontal accuracy distributions were calculated as the radii of two circles, centred at the antenna position, containing 95 and 98 percent of all GPS points logged. S-plus statistical software was used for all calculations (S-Plus for Windows, Seattle, WA).

Dynamic Tests

Positional data from each of the four GPS instruments were collected for four transportation modes: walking, cycling, automobile, and transit bus. Walking and cycling data were collected along a route approximately 5 km in length. The average time to complete the route was 66 min for walking and 24 min by bicycle. Test participants were asked to walk in the middle of the sidewalk, unless passing another pedestrian, and while cycling to maintain a consistent distance away from the curb unless changing lanes or turning. The automobile test route was approximately 40 min in length; drivers were instructed to abide by posted speed limits and to select the lane closest to the curb on roads with more than two lanes. Transit bus data were collected along an urban downtown bus route with a total loop time of approximately 80 min. Riders were not provided with any specific instructions regarding seating placement in order to avoid special efforts to improve signal reception by selecting a window seat.

Dynamic Testing Analysis

All positional data were converted into Cartesian coordinates and imported into a geographic information system for further analysis. Digitally orthorectified aerial photographs [70] were used to determine the true path coordinates by creating polyline themes for each transport mode route. True paths were in the middle of the sidewalk for the pedestrian data, within 1 m of the curb for cycling data, and in the middle of the lane for automobile data (except when lanes were crossed for turning). A similar process was used for the bus route, using spatially-referenced route data supplied by Halifax Regional Municipality served as a guide. Variations in the widths of the sidewalks and roads were accounted for when determining the true path polylines. GPS data from each transportation scenario were categorized according to three types of built environment: mixed density, open sky, and urban canyon. The route of the transit bus did not allow for the collection of GPS data under open sky conditions. Buffers of 2, 3.5, and 5 m were created on either side of the true paths and coordinates were analyzed to determine the percentage of points recorded inside each buffer distance and in each built environment type (Figure 4). The numbers of satellites used to determine location and dilution of position measures (HDOP and PDOP) were recorded directly from GPS output.

Figure 4
figure 4

A sample of points logged by the GPS instrument during a 45 minute walking test in open sky or optimal reception conditions. The true path (dotted line) is the sidewalk. Most points fall within 2 m of the true path.

Results

Static Tests

Table 1 shows the number of points logged by each HeraLogger to determine the accuracy of the instruments. The average duration of the test was 68 min. The loggers received information from an average of 10.3 satellites during the course of this evaluation resulting in accurate position estimates and nominal PDOP and HDOP values (i.e. below 4.0 and 2.0 respectively). Results revealed horizontal position accuracies of 2.65 ± 0.25 m for 50% of logged values, 7.83 ± 1.17 m for 98% of logged values, and an average distance of 2.82 ± 0.40 m away from the known reference location.

Table 1 Horizontal accuracy comparison of four GPS instruments from the Forested Park test

Table 2 gives details of the precision of the GPS instrument under three built environment scenarios. Precision was best in the park setting. The average duration of the logs was 115 min, and the mean number of satellites obtained, as well as HDOP and PDOP values, were similar to those data from the accuracy tests. Half of the values lie within 2.00 ± 0.35 m and 98% lie within 5.45 ± 1.06 m. Logged data from the rooftop location are to some extent less precise than those from the urban park location. Logging took place over a 24 h period and, on average, one less satellite was used to provide a location solution. The mean CEP value is 2.35 ± 0.11 m and 98% of the location data fall within 6.18 ± 0.29 m. Position precision estimates worsened under urban canyon conditions where multipath effects are expected to be more of an issue. Data were logged on average for 63 min; three fewer satellites were available to derive location solutions, in comparison with the urban park test. PDOP values almost doubled compared to other locations. The radius of the circle required to capture 50% of the position data was roughly nine times larger than for data from the urban park. A circle with an average of radius of 53.14 ± 25.06 m captured up to 98% of the GPS data.

Table 2 Horizontal precision estimates of four GPS instruments in three built environment types

Dynamic Tests

Table 3 shows the performance of the GPS instruments using different forms of transportation in the three built environments. Positional accuracy under open sky conditions was best when cycling and walking (72% to 99.1% of all positions within 5 m). No data are available for transit bus tests in open sky conditions. In mixed density areas, determinations of position were more accurate from automobile logs (89% within 5 m), followed by cycling (81% within 5 m), walking (74.5% within 5 m) and then transit bus (65% within 5 m). In urban canyon areas where GPS receivers are most challenged, the greatest positional accuracy was attained from automobile (82.6% within 5 m) and transit bus modes (60.2% within 5 m), followed by walking and then cycling (57% and 53.7% within 5 m, respectively).

Table 3 Resolution estimates of four GPS instruments derived from four transportation modes in three built environment types

Satellite reception was best for automobile travel (10 satellites) followed by walking, cycling and then transit bus transportation (8.3 satellites); however, this difference in reception did not always translate into reduced horizontal and positional dilution of position values. Figure 4 shows a close-up perspective of a pedestrian path under open sky conditions. The dotted line shows the true path (sidewalk) bounded by 2 m, 3.5 m, and 5 m buffers, as well as the actual GPS locations logged at 5 s intervals. As expected, signal accuracy for walking and cycling deteriorated as the potential for the built environment to interfere with satellite reception increased. Differences in signal reception are less apparent under varying built environments for automobile trips.

Figure 5 shows the relationship between horizontal (HDOP) and positional dilution of position (PDOP) under static and dynamic GPS instrument testing conditions. Static HDOP varies in a log-linear fashion with PDOP, so that reductions in horizontal accuracy diminish at a value of approximately PDOP = 2.3; this implicates vertical dilution of position as the reason for decreased PDOP in static conditions. PDOP varied less with HDOP under dynamic conditions with no clear association between dilution of position values. HDOP values were greater under dynamic as compared to static conditions.

Figure 5
figure 5

The relationship between HDOP and PDOP in static and dynamic accuracy testing conditions. Dilution of position increases under dynamic conditions.

Discussion

Finding an approach to accurately define living spaces is a problem inherent to place and health research. Because of the way existing data are presented, researchers are usually forced to adopt existing administrative boundaries; if these are inadequate they may have to develop alternative strategies to relate characteristics of place to explanations of health variations. Wearable global positioning systems (GPS) can accurately describe where individuals spend their time thus providing a more detailed assessment of places relevant to health. GPS data are also preferred to the use of time diaries as they minimize recall bias and may also reduce problems of compliance [34].

The objectives of this research were to develop and test a wearable GPS instrument for health and place research, as well as to establish a general framework of dynamic and static tests for evaluating and testing human tracking devices based on GPS technology. Specifically, we developed a passive wearable GPS receiver data logger that provided consistent time-location recording capabilities under a variety of static and dynamic conditions in an urban environment. Unlike devices used in previous research, the design characteristics of our GPS instrument allow for extended high resolution positioning under typical urban conditions and required little input or maintenance. The instrument can sample at 1 s intervals for approximately 70 h continuously before recharge, and there is no danger of approaching data storage limitations. Comparison with devices used in other studies is difficult due to the range of parameters selected by researchers, as well as a determination of what constitutes a "wearable" device. However, a similar device designed for assessing human exposures was able to record 25 h of data at 5 s intervals, and had a maximum logging capacity of 30 h [59].

Position accuracy and instrument precision under static and dynamic conditions in a variety of environments is critical for time-location analysis. There are a number of factors that influence GPS instrument position accuracy, most of which are unavoidable or beyond the control of the researcher; however, the influence of these factors is usually measurable. For example, researchers can investigate satellite constellation geometry to choose sampling times when dilution of position is diminished. Errors may also arise from atmospheric interference and instrument quality. Due to cost restrictions most survey-grade GPS (highly accurate) are not amenable to human tracking studies at this time.

The average accuracy of our GPS instrument is 2.8 m (± 0.4 m) when not in motion. This is a respectable degree of accuracy when compared to a range of 1.7 m to 10 m reported in similar studies [35, 53, 59, 71], and is likely to be acceptable for most place and health studies. Instrument precision did not vary much between open and mixed density urban development conditions (98% of values lying within 5.5 m to 6.2 m of the true location). However, accuracy fell sharply in urban canyon settings (98% of values within 53.1 m of the true position). These values, which are similar to those obtained in similar evaluations [72], would inflate in larger cities with taller buildings and denser development.

GPS instrument accuracy under dynamic conditions is particularly relevant for place and health research, as well as for exposure assessment studies. People rarely remain in one location for extended periods of time (with the exception of sleeping), and movement is likely occur among a variety of locations and encompass multiple transportation modes. We evaluated the accuracy of a wearable GPS instrument in three types of urban environment across four transportation modalities. As expected, instrument accuracy is greatest when the potential for interference is least, regardless of transportation mode. However, the impact of the environment was less pronounced for automobile and bus transit modes, with the latter mode having relatively poorer absolute accuracy, regardless of location in an urban area. We found that under dynamic conditions, positional accuracy tends to improve as the distance from potential interference increases. Automobiles and buses operate in roadways which are further from buildings and other objects than cyclists or pedestrians. In a study involving children from the Seattle area, two wearable GPS instruments were tested for position accuracy after a 4 km walk in the city. The researchers reported 96 percent of locations within 5 m and 78.8% within 2 m [59] compared to 76.2% and 50.5% from our tests. However, direct comparison is difficult since the instruments used in the Seattle study were switched on in advance of data collection (this ensures a good initial location fix), and the data were post-processed to correct for errors using differential signal data. No information about the potential for physical interference arising from urban structures and features was available in that study.

The wearable GPS instrument described here is sufficiently accurate to locate and correctly classify a variety of human activities. Ideally, position data would be obtained for all activities regardless of environment. However buildings constructed of impenetrable materials limit GPS tracking. Although we do not report on measurements undertaken indoors, preliminary data from an unpublished pilot study of 53 individuals suggests that indoor tracking is possible under some conditions. The inconsistency of reception indoors, and to some extent outdoors, is explained by building materials, proximity to windows or sky, distance from building walls, and potential interference from other electronic devices [73]. Specifically, indoor environments reduce satellite availability, accuracy (due to high noise and degraded geometry), positioning continuity, and reliability. The availability of high-sensitivity GPS (HSGPS) and assisted GPS (AGPS) will help to improve indoor positioning performance [74]; however, even under ideal indoor conditions, signal accuracy is limited to within 10 m for residential and 70 m for commercial buildings [43].

Clearly GPS tells us very little about the context of place or the places where activities occur. While the data may indicate a visit to a local pub, we have no qualitative information on whether the visit was a pleasant experience or not. Ultimately combining GPS position data with questionnaires, interviews or other forms of data collection would enhance our understanding of place and how it influences health and well-being.

A wearable GPS instrument such as the HeraLogger could be used in other health research settings, and may be able to provide novel insights into temporal and spatial processes underlying place and health associations. We have conducted a pilot project where GPS instruments were worn with passive air particle samplers to improve air pollution exposure assessments. Collecting GPS position information over a 7 d period could provide a crude but objective estimation of an individual's spatial footprint. In future work we intend to compare this footprint to boundaries traditionally used in place and health research to assess bias arising from misclassification of place. Also of interest is the development of measures created from GPS information relevant to processes associated with variations in health. For example, social capital researchers may find GPS data useful for investigating places where socialization does and does not occur outside of the home and work environments. What is apparent from the data we have collected to date is that GPS data and time-location analysis will enable a more objective characterization of human activity patterns, so that we may better understand the spatial and temporal processes underlying the determinants of population health.

Conclusion

Wearable GPS instruments can monitor human activities. Spatial accuracy is adequate to locate individuals within distinct subenvironments and, with knowledge of location, it is possible to make some assumptions about activity. Rather than rely on static areal units as proxies for places, wearable GPS devices can be used to derive a more complete picture of the different places that influence an individual's well-being. The measures are objective and are less subject to biases associated with recall of location. The resulting data can be visualized using maps delineating the spatial and temporal boundaries traversed by individuals. This is important for two reasons. First, it brings a dynamic perspective to place and health research. The influence of place on health is dynamic in that certain places are more or less relevant to wellbeing determined by the length of time in any location and by the frequency of activity in the location. Second, data can be grouped by traditional health determinants to see if there are any consistent spatio-temporal patterns among groups with similar characteristics, or whether there are characteristics of places in time that comprise or can explain variation in health and wellbeing as distinct from social and economic health determinants. Overall the use of wearable GPS-enabled technologies represents a logical next step in the assessment of the association between place and health.

References

  1. Canadian Institute for Health Information (CIHI): CPHI Workshop on Place and Health. Ottawa. 2003

    Google Scholar 

  2. Canadian Institute for Health Information (CIHI): Improving the Health of Canadians: An Introduction to Health in Urban Places. Ottawa. 2006

    Google Scholar 

  3. Macintyre S, Ellaway A, Cummins S: Place effects on health: how can we conceptualise, operationalise and measure them?. Social Science & Medicine. 2002, 55: 125-139. 10.1016/S0277-9536(01)00214-3.

    Article  Google Scholar 

  4. Sampson RJ: The neighborhood context of well-being. Perspect Biol Med. 2003, 46: S53-S64.

    Article  PubMed  Google Scholar 

  5. Tunstall HV, Shaw M, Dorling D: Places and health. Journal of Epidemiology and Community Health. 2004, 58: 6-10. 10.1136/jech.58.1.6.

    Article  PubMed  CAS  PubMed Central  Google Scholar 

  6. Krieger N, Chen JT, Waterman PD, Soobader MJ, Subramanian SV, Carson R: Geocoding and monitoring of US socioeconomic inequalities in mortality and cancer incidence: does the choice of area-based measure and geographic level matter?: the Public Health Disparities Geocoding Project. American Journal of Epidemiology. 2002, 156: 471-482. 10.1093/aje/kwf068.

    Article  PubMed  Google Scholar 

  7. Ross NA, Tremblay SS, Graham K: Neighbourhood influences on health in Montreal, Canada. Social Science & Medicine. 2004, 59: 1485-1494. 10.1016/j.socscimed.2004.01.016.

    Article  Google Scholar 

  8. Coulton CJ, Korbin J, Chan T, Su M: Mapping residents' perceptions of neighborhood boundaries: a methodological note. American Journal of Community Psychology. 2001, 29: 371-383. 10.1023/A:1010303419034.

    Article  PubMed  CAS  Google Scholar 

  9. Lee BA, Campbell KE: Common ground? Urban neighborhoods as survey respondents see them. Social Science Quarterly. 1997, 78: 922-936.

    Google Scholar 

  10. Haney WG, Knowles ES: Perception of neighborhoods by city and suburban residents. Human Ecology. 1978, 6: 201-214. 10.1007/BF00889095.

    Article  Google Scholar 

  11. Haynes R, Daras K, Reading R, Jones A: Modifiable neighbourhood units, zone design and residents' perceptions. Health & Place. 2007, 13: 812-825. 10.1016/j.healthplace.2007.01.002.

    Article  Google Scholar 

  12. Martin D: Automatic neighbourhood identification from population surfaces. Computers, Environment and Urban Systems. 1998, 22: 107-120. 10.1016/S0198-9715(98)00011-8.

    Article  Google Scholar 

  13. Geronimus AT, Bound J, Neidert LJ: On the validity of using census geocode characteristics to proxy individual socioeconomic characteristics. Journal of the American Statistical Association. 1996, 91: 529-537. 10.2307/2291645.

    Article  Google Scholar 

  14. Hayes MV: "Ecologic confounders" in the context of a spatial analysis of the air pollution-mortality relationship. Journal of Toxicology and Environmental Health A. 2003, 66: 1779-1782. 10.1080/15287390306427.

    Article  CAS  Google Scholar 

  15. Soja EW: Postmodern geographies: the reassertion of space in critical social theory. 1989, London: Verso

    Google Scholar 

  16. Dungan JL, Perry JN, Dale MRT, Legendre P, Citron-Pousty S, Fortin MJ, Jakomulska A, Miriti M, Rosenberg MS: A balanced view of scale in spatial statistical analysis. Ecography. 2002, 25: 626-640. 10.1034/j.1600-0587.2002.250510.x.

    Article  Google Scholar 

  17. Jelinski DE, Wu JG: The modifiable areal unit problem and implications for landscape ecology. Landscape Ecology. 1996, 11: 129-140. 10.1007/BF02447512.

    Article  Google Scholar 

  18. Openshaw S: The Modifiable Areal Unit Problem. 1984, Norwich: Geo Books

    Google Scholar 

  19. Abrahamowicz M, du Berger R, Krewski D, Burnett R, Bartlett G, Tamblyn RM, Leffondre K: Bias due to aggregation of individual covariates in the Cox regression model. American Journal of Epidemiology. 2004, 160: 696-706. 10.1093/aje/kwh266.

    Article  PubMed  Google Scholar 

  20. Geronimus AT, Bound J: Use of census-based aggregate variables to proxy for socioeconomic group: evidence from national samples. American Journal of Epidemiology. 1998, 148: 475-486.

    Article  PubMed  CAS  Google Scholar 

  21. Krieger N, Waterman P, Chen JT, Soobader MJ, Subramanian SV, Carson R: Zip code caveat: bias due to spatiotemporal mismatches between zip codes and US census-defined geographic areas – the Public Health Disparities Geocoding Project. American Journal of Public Health. 2002, 92: 1100-1102. 10.2105/AJPH.92.7.1100.

    Article  PubMed  PubMed Central  Google Scholar 

  22. Krieger N: Women and social class: a methodological study comparing individual, household, and census measures as predictors of black/white differences in reproductive history. J Epidemiol Community Health. 1991, 45: 35-42. 10.1136/jech.45.1.35.

    Article  PubMed  CAS  PubMed Central  Google Scholar 

  23. King G: A Solution to the Ecological Inference Problem: Reconstructing Individual Behavior from Aggregate Data. 1997, Princeton, N.J: Princeton University Press

    Google Scholar 

  24. Fotheringham AS, Wong DWS: The Modifiable Areal Unit Problem in Multivariate Statistical-Analysis. Environment and Planning A. 1991, 23: 1025-1044. 10.1068/a231025.

    Article  Google Scholar 

  25. Fotheringham AS, Charlton ME, Brunsdon C: Geographically weighted regression: a natural evolution of the expansion method for spatial data analysis. Environment and Planning A. 1998, 30: 1905-1927. 10.1068/a301905.

    Article  Google Scholar 

  26. Fotheringham AS: A bluffer's guide to a solution to the ecological inference problem. Annals of the Association of American Geographers. 2000, 90: 582-586. 10.1111/0004-5608.00211.

    Article  Google Scholar 

  27. Hägerstrand T: Time-geography: Focus on the Corporeality of Man, Society, and Environment. The Science and Praxis of Complexity: Contributions to the Symposium Held at Montpellier, France, 9–11 May 1984. Edited by: Aida S. 1985, Tokyo: United Nations University, 193-216.

    Google Scholar 

  28. Miller H: Modelling accessibility using space-time prism concepts within geographic information systems. International Journal of Geographic Information Systems. 2001, 5: 287-303. 10.1080/02693799108927856.

    Article  Google Scholar 

  29. Robinson JP, Godbey G: Time for Life: The Surprising Ways Americans Use Their Time. 1997, University Park, PA: Pennsylvania State University Press

    Google Scholar 

  30. Buliung RN, Kanaroglou PS: Urban form and household activity-travel behaviour. Growth and Change. 2006, 37: 174-201. 10.1111/j.1468-2257.2006.00314.x.

    Article  Google Scholar 

  31. Kwan MP: Space-time and integral measures of individual accessibility: A comparative analysis using a point-based framework. Geographical Analysis. 1998, 30: 191-216.

    Article  Google Scholar 

  32. Kwan MP, Lee J: Geovisualization of Human Activity Patterns using 3-D GIS: A time-geographic approach. Spatially Integrated Social Science. Edited by: Goodchild MF, Janelle DG. 2004, New York: Oxford University Press

    Google Scholar 

  33. Stopher P, FitzGerald C, Zhang J: Advances in GPS Technology for Measuring Travel. Sydney. 2006

    Google Scholar 

  34. Elgethun K, Yost MG, Fitzpatrick CT, Nyerges TL, Fenske RA: Comparison of global positioning system (GPS) tracking and parent-report diaries to characterize children's time-location patterns. Journal of Exposure Science and Environmental Epidemiology. 2007, 17: 196-206. 10.1038/sj.jes.7500496.

    Article  PubMed  Google Scholar 

  35. Phillips ML, Hall TA, Esmen NA, Lynch R, Johnson DL: Use of global positioning system technology to track subject's location during environmental exposure sampling. Journal of Exposure Analysis and Environmental Epidemiology. 2001, 11: 207-215. 10.1038/sj.jea.7500161.

    Article  PubMed  CAS  Google Scholar 

  36. Leick A: GPS satellite surveying. 2004, Indianapolis, IN: Wiley Publishing, Inc

    Google Scholar 

  37. Hofmann-Wellenhof H, Lichteneeger H, Collins J: Global Positioning System: Theory and Practice. 2001, New York, NY: Springer-Verlag

    Book  Google Scholar 

  38. Schutz Y, Chambaz A: Could a satellite-based navigation system (GPS) be used to assess the physical activity of individuals on earth?. European Journal of Clinical Nutrition. 1997, 51: 338-339. 10.1038/sj.ejcn.1600403.

    Article  PubMed  CAS  Google Scholar 

  39. Terrier P, Ladetto Q, Merminod B, Schutz Y: Measurement of the mechanical power of walking by satellite positioning system (GPS). Medicine & Science in Sports and Exercise. 2001, 33: 1912-8. 10.1097/00005768-200111000-00017.

    Article  CAS  Google Scholar 

  40. Adrados C, Girard I, Gendner JP, Janeau G: Global positioning system (GPS) location accuracy improvement due to selective availability removal. Comptes Rendus Biologies. 2002, 325: 165-170. 10.1016/S1631-0691(02)01414-2.

    Article  PubMed  Google Scholar 

  41. Misra P, Enge P: Global Positioning System: Signals, Measurements & Performance. 2001, Lincoln, MA: Ganga-Jamuna Press

    Google Scholar 

  42. Theiss A, Yen DC, Ku CY: Global Positioning Systems: an analysis of applications, current development and future implementations. Computer Standards & Interfaces. 2005, 27: 89-100. 10.1016/j.csi.2004.06.003.

    Article  Google Scholar 

  43. Lachapelle G, Kuusniemi H, Dao DTH, MacGougan G, Cannon ME: HSGPS signal analysis and performance under various indoor conditions. Navigation. 2004, 51: 29-43.

    Article  Google Scholar 

  44. Dwolatzky B, Trengove E, Struthers H, McIntyre JA, Martinson NA: Linking the global positioning system (GPS) to a personal digital assistant (PDA) to support tuberculosis control in South Africa: a pilot study. Int J Health Geogr. 2006, 5: 34-10.1186/1476-072X-5-34.

    Article  PubMed  PubMed Central  Google Scholar 

  45. Wilkinson D, Tanser F: GIS/GPS to document increased access to community-based treatment for tuberculosis in Africa. Geographic information system/global positioning system. Lancet. 1999, 354: 394-5. 10.1016/S0140-6736(99)01893-0.

    Article  PubMed  CAS  Google Scholar 

  46. Keating J, Macintyre K, Mbogo CM, Githure JI, Beier JC: Characterization of potential larval habitats for Anopheles mosquitoes in relation to urban land-use in Malindi, Kenya. Int J Health Geogr. 2004, 3: 9-10.1186/1476-072X-3-9.

    Article  PubMed  PubMed Central  Google Scholar 

  47. Bonner MR, Han D, Nie J, Rogerson P, Vena JE, Freudenheim JL: Positional accuracy of geocoded addresses in epidemiologic research. Epidemiology. 2003, 14: 408-412.

    PubMed  Google Scholar 

  48. Zhan FB, Brender JD, De LI, Suarez L, Langlois PH: Match rate and positional accuracy of two geocoding methods for epidemiologic research. Annals of Epidemiology. 2006, 16: 842-849. 10.1016/j.annepidem.2006.08.001.

    Article  PubMed  Google Scholar 

  49. Hummel J, Figl M, Kollmann C, Bergmann H, Birkfellner W: Evaluation of a miniature electromagnetic position tracker. Medical Physics. 2002, 29: 2205-2212. 10.1118/1.1508377.

    Article  PubMed  Google Scholar 

  50. Schofield G, Bishop CM, MacLean G, Brown P, Baker M, Katselidis KA, Dimopoulos P, Pantis J, Hays GC: Novel GPS tracking of sea turtles as a tool for conservation management. Journal of Experimental Marine Biology and Ecology. 2007, 347: 58-68. 10.1016/j.jembe.2007.03.009.

    Article  Google Scholar 

  51. Linke J, Franklin SE, Huettmann F, Stenhouse GB: Seismic Cutlines, Changing Landscape Metrics and Grizzly Bear Landscape use in Alberta. Landscape Ecology. 2005, 20: 811-826. 10.1007/s10980-005-0066-4.

    Article  Google Scholar 

  52. Adriansen HK, Nielsen TT: The geography of pastoral mobility: A spatio-temporal analysis of GPS data from Sahelian Senegal. GeoJournal. 2005, 64: 177-188. 10.1007/s10708-005-5646-y.

    Article  Google Scholar 

  53. Agouridis CT, Stombaugh TS, Workman SR, Koostra BK, Edwards DR, Vanzant ES: Suitability of a GPS collar for grazing studies. Transactions of the Asae. 2004, 47: 1321-1329.

    Article  Google Scholar 

  54. Phillips KA, Elvey CR, Abercrombie CL: Applying GPS to the study of primate ecology: A useful tool?. American Journal of Primatology. 1998, 46: 167-172. 10.1002/(SICI)1098-2345(1998)46:2<167::AID-AJP6>3.0.CO;2-U.

    Article  PubMed  CAS  Google Scholar 

  55. Sprague DS, Kabaya M, Hagihara K: Field testing a global positioning system (GPS) collar on a Japanese monkey: reliability of automatic GPS positioning in a Japanese forest. Primates. 2004, 45: 151-154. 10.1007/s10329-003-0071-7.

    Article  PubMed  Google Scholar 

  56. Renzema M, Mayo-Wilson E: Can electronic monitoring reduce crime for moderate to high-risk offenders?. Journal of Experimental Criminology. 2005, 1: 1-23. 10.1007/s11292-005-1615-1.

    Article  Google Scholar 

  57. Terrier P, Schutz Y: How useful is satellite positioning system (GPS) to track gait parameters? A review. Journal of Neuroengineering and Rehabilitation. 2005, 2: 28-10.1186/1743-0003-2-28.

    Article  PubMed  PubMed Central  Google Scholar 

  58. Rodriguez DA, Brown AL, Troped PJ: Portable global positioning units to complement accelerometry-based physical activity monitors. Medicine & Science in Sports and Exercise. 2005, 37: 572-81. 10.1249/01.mss.0000185297.72328.ce.

    Article  Google Scholar 

  59. Elgethun K, Fenske RA, Yost MG, Palcisko GJ: Time-location analysis for exposure assessment studies of children using a novel global positioning system instrument. Environmental Health Perspectives. 2003, 111: 115-22.

    Article  PubMed  PubMed Central  Google Scholar 

  60. Wiehe SE, Carroll AE, Liu GC, Haberkorn KL, Hoch SC, Wilson JS, Fortenberry JD: Using GPS-enabled cell phones to track the travel patterns of adolescents. International Journal of Health Geographics. 2008, 7: doi:10.1186/1476-072X-7-22.

    Google Scholar 

  61. Milton R, Steed A: Mapping carbon monoxide using GPS tracked sensors. Environmental Monitoring and Assessment. 2007, 124: 1-19. 10.1007/s10661-006-9488-y.

    Article  PubMed  CAS  Google Scholar 

  62. Pandian PS, Mohanavelu K, Safeer KP, Kotresh TM, Shakunthala DT, Gopal P, Padaki VC: Smart Vest: Wearable multi-parameter remote physiological monitoring system. Med Eng Phys. 2007, 30 (4): 466-477. 10.1016/j.medengphy.2007.05.014.

    Article  PubMed  Google Scholar 

  63. u-blox AG: RCB-4H ANTARIS 4 Programmable GPS Receiver Board. 2006, Thalwill, Switzerland

    Google Scholar 

  64. Institute of Navigation (ION): ION STD 101: Recommended Test Procedures for GPS. Alexandria, VA. 1997

    Google Scholar 

  65. Stombaugh TS, Shearer SA, Fulton J: Elements of a dynamic GPS test standard. St. Joseph, MI. 2002

    Google Scholar 

  66. Moen R, Pastor J, Cohen J: Accuracy of GPS telemetry collar locations with differential correction. Journal of Wildlife Management. 1997, 61: 530-539. 10.2307/3802612.

    Article  Google Scholar 

  67. Federal Geographic Data Committee (FGDC): Geospatial Positioning Accuracy Standards Part 3, National Standard for Spatial Data Accuracy. Reston, VA. 1998

    Google Scholar 

  68. NovAtel: GPS Position Accuracy Measures. Calgary, AB. 2003

    Google Scholar 

  69. van Diggelen F: GNSS Accuracy: Lies, Damn Lies, and Statistics. GPS World. 2007, 18: 26-32.

    Google Scholar 

  70. Nova Scotia Department of Natural Resources – GIS Division: Hurricane Juan Digital Image Mosaics. 2004, Truro, NS, Department of Natural Resources

    Google Scholar 

  71. Wing MG, Eklund A, Kellogg LD: Consumer-grade global positioning system (GPS) accuracy and reliability. Journal of Forestry. 2005, 103: 169-173.

    Google Scholar 

  72. Melgard TE, Lachapelle G, Gehue H: GPS Signal availability in and urban area – Receiver performance analysis. IEEE New York, NY, 487-493.

  73. Kleusberg A, Langley RB: The limitations of GPS. GPS World. 1990, 1: 50-52.

    Google Scholar 

  74. Lachapelle G: GNSS indoor location technologies. Journal of Global Positioning Systems. 2004, 3: 2-11.

    Article  Google Scholar 

Download references

Acknowledgements

DR acknowledges the financial support of the Canadian Institutes for Health Research in the form of a Doctoral Research Award and the McLaughlin Center for Population Health Risk Assessment at the University of Ottawa. The authors would also like to acknowledge the contribution of: 1) Gavin King who provided assistance with testing of the wearable GPS data logger; and, 2) Mark MacDonald who provided engineering and technical assistance with the development to the wearable GPS data logger.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Daniel Rainham.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

DR conceived of the study, participated in the development and testing of the wearable GPS data logger, performed any analyses and drafted the manuscript. DK and IM helped to draft and revise the manuscript. MS participated in design of the wearable GPS data logger and revised the manuscript. BL led the development of the wearable GPS data logger. All authors read and approved the final manuscript.

Authors’ original submitted files for images

Rights and permissions

This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Rainham, D., Krewski, D., McDowell, I. et al. Development of a wearable global positioning system for place and health research. Int J Health Geogr 7, 59 (2008). https://doi.org/10.1186/1476-072X-7-59

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1476-072X-7-59

Keywords